منتديات دريم بوكس  

العودة   منتديات دريم بوكس > > >

Emus+Plugins+Keys+Skin جميع الملحقات والإضافات المساعدة لـ دريم بوكس و أجهزة VU+

  1  
ThE MaStEr

warning is a beta version it is possible that it is the thing that not work, as bootmenu, and the scrip of repair usb, silk on you can use the rs232 cable in case of crash,and you have an internal hard drive to make it work

Good evening, here is my first utility, the multiboot-v1beta-vuuno-boot-cfe. In order to use this utility 7 partitions need to be created on a usb ***. The first partition needs to be FAT formatted, the others will be formatted in ext3 with the integrated script or using my partitioning script.

? It is compatible with 1016 cylinder USB where the image needs to be stored. ?

Once formatted properly, the usb *** will auto mount, one only needs to store an image in /media/hdd/image directory. Download the USB version of an image, unzip on the PC and only transfer the root_cfe_auto.jffs2 file with FTP to the /media/hdd/image directory. extraction-*-sdb*.sh.


كود:
readme multiboot-cfe-paritionneur-v1-vuuno
add multiboot-cfe-paritionneur-v1-vuuno.ipk Special vuuno, 7 CRE parity are 2GB or 4GB or more
كود:
ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuuno.ipk
 
warning this version paritionne this package installed then your usb multiboot-cfe
multiboot-cfe-paritionneur-v1-vuuno.ipk

كود:
ipkg install /tmp/dosfstools_3.0.11-r2_mipsel.ipk
 
for Relocation after the flash flashed Abors installed this package and then installed multiboot-cfe
dosfstools_3.0.11-r2_mipsel.ipk

كود:
ipkg install /tmp/multiboot-v*-cfe.ipk
 
warning this version is a full version based on version 42a, but it jous the new database without erasing your USB key and it does a full install but you have to Abors paritionné with the usb multiboot-cfe -paritionneur-v1-vuplus.ipk if you have never installed this multiboot, it takes between 5 and 15 minutes until the end of the installation
multiboot-beta-vuuno-v2-cfe.ipk

كود:
Here is the repair kit in case of lock on the boot
vuplus-répare-env.zip

waring when you put an image in multiboot, verified that the image is complete, otherwise the demo will remain on the console boot, and must be removed manually or parity approx flach reboot manually with a null modem cable

news:

if something goes wrong you need the rs232 cable with version 42b, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made ​​as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo

كود:
readme multiboot-cfe beta2 vuuno
bug fix retrieval UBIFS
bug fix on reboot same image
Adding image aaf 3.1.1
 
----------------------------------
readme multiboot-cfe beta1 vuuno
add vtie 3.11 ,plie 3.11,off 3.11,vix 3.11,blackole 3.11




-----------------------------




how to install multiboot cfe?

----------------------------------

have a usb of at least 2 gb

ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuplus.ipk

ipkg install /tmp/multiboot-v*-cfe.ipk






rebooted at the end the demo




how to install an image?

-----------------------------

go on the multiboot menu and select cfe jffs2 image retrieval

but before downloading the image format you want to install usb and

transfer the file "root_cfe_auto.jffs2" in / media / hdd / image once transferred

sélélection the image you want to install and wait for extracting approximately

5 to 15 minute warning to this step goes well it should have 1 internal hard drive to install

Because of the swap and because we must save the file "root_cfe_auto.jffs2" in / media / hdd / image, noted

esata that must walk as externally




how to boot image?

---------------------------

go on the multiboot menu and select cfe boot image and select the image that has been installed,

attention must be that the image that you booted or installed in good parity, otherwise demo will remain on the starting

and it will be restarted manually on flach with the RS232 cable, once selected the image that will boot, reboot




how to get back on flach?

-----------------------------

go on the multiboot menu and select cfe return flach flach and back and rebooted the demo




my demo stuck on starting in on an image bootent usb how to troubleshoot?

-------------------------------------------------- -------------------------------------------

do not panic, unplug your demo and removed the USB drive, connected the RS232 cable and connected with hyperterminal

rekindled the demo and you should see the boot sequence demo and it will stop all alone when she vera not usb

and will remain on the console of the CFE (bootloader)

make it simple to troubleshoot as sa

unsetenv STARTUP

and rebooted and the demo in Redem flach


news :

if something goes wrong you need the rs232 cable with version 38, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made ​​as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo


Thanks gigi


أقرأ ايضا .. قد يعجبك :

من مواضيعى فى المنتدى

The BBC has a duty to be distinctiveBBC trustee Diane Coyle argues that the privilege of licence fee funding gives the corpor
شيفرة قناة Dubai Sports CH 33
OPticumc tolbox by naste2
Softcam keys 25/12/2012 - سوفتكام اليوم 25/12/2012
مفاتيح باقة Ntv+ ccw 36e
Sky Italia and Mediaset censured for aggressive ad campaigns
ملف قنوات دريم بوكس , ciefp settings E1 , بتاريخ 02-05-2012
Enigma1 Maker Settings 2012-07-18


أدوات الموضوع



الساعة الآن 07:49 AM.


Powered by vBulletin Version 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd
Support: منتديات دريم بوكس