vuuno MultibootCfe beta V2 experimental
-
ThE MaStEr
2012-01-07
-
warning is a beta version it is possible that it is the thing that not work, as bootmenu, and the scrip of repair usb, silk on you can use the rs232 cable in case of crash,and you have an internal hard drive to make it work
Good evening, here is my first utility, the multiboot-v1beta-vuuno-boot-cfe. In order to use this utility 7 partitions need to be created on a usb ***. The first partition needs to be FAT formatted, the others will be formatted in ext3 with the integrated script or using my partitioning script.
? It is compatible with 1016 cylinder USB where the image needs to be stored. ?
Once formatted properly, the usb *** will auto mount, one only needs to store an image in /media/hdd/image directory. Download the USB version of an image, unzip on the PC and only transfer the root_cfe_auto.jffs2 file with FTP to the /media/hdd/image directory. extraction-*-sdb*.sh.
كود:
readme multiboot-cfe-paritionneur-v1-vuuno
add multiboot-cfe-paritionneur-v1-vuuno.ipk Special vuuno, 7 CRE parity are 2GB or 4GB or more
كود:
ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuuno.ipk
warning this version paritionne this package installed then your usb multiboot-cfe
multiboot-cfe-paritionneur-v1-vuuno.ipk
كود:
ipkg install /tmp/dosfstools_3.0.11-r2_mipsel.ipk
for Relocation after the flash flashed Abors installed this package and then installed multiboot-cfe
dosfstools_3.0.11-r2_mipsel.ipk
كود:
ipkg install /tmp/multiboot-v*-cfe.ipk
warning this version is a full version based on version 42a, but it jous the new database without erasing your USB key and it does a full install but you have to Abors paritionné with the usb multiboot-cfe -paritionneur-v1-vuplus.ipk if you have never installed this multiboot, it takes between 5 and 15 minutes until the end of the installation
multiboot-beta-vuuno-v2-cfe.ipk
كود:
Here is the repair kit in case of lock on the boot
vuplus-répare-env.zip
waring when you put an image in multiboot, verified that the image is complete, otherwise the demo will remain on the console boot, and must be removed manually or parity approx flach reboot manually with a null modem cable
news:
if something goes wrong you need the rs232 cable with version 42b, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo
كود:
readme multiboot-cfe beta2 vuuno
bug fix retrieval UBIFS
bug fix on reboot same image
Adding image aaf 3.1.1
----------------------------------
readme multiboot-cfe beta1 vuuno
add vtie 3.11 ,plie 3.11,off 3.11,vix 3.11,blackole 3.11
-----------------------------
how to install multiboot cfe?
----------------------------------
have a usb of at least 2 gb
ipkg install /tmp/multiboot-cfe-paritionneur-v1-vuplus.ipk
ipkg install /tmp/multiboot-v*-cfe.ipk
rebooted at the end the demo
how to install an image?
-----------------------------
go on the multiboot menu and select cfe jffs2 image retrieval
but before downloading the image format you want to install usb and
transfer the file "root_cfe_auto.jffs2" in / media / hdd / image once transferred
sélélection the image you want to install and wait for extracting approximately
5 to 15 minute warning to this step goes well it should have 1 internal hard drive to install
Because of the swap and because we must save the file "root_cfe_auto.jffs2" in / media / hdd / image, noted
esata that must walk as externally
how to boot image?
---------------------------
go on the multiboot menu and select cfe boot image and select the image that has been installed,
attention must be that the image that you booted or installed in good parity, otherwise demo will remain on the starting
and it will be restarted manually on flach with the RS232 cable, once selected the image that will boot, reboot
how to get back on flach?
-----------------------------
go on the multiboot menu and select cfe return flach flach and back and rebooted the demo
my demo stuck on starting in on an image bootent usb how to troubleshoot?
-------------------------------------------------- -------------------------------------------
do not panic, unplug your demo and removed the USB drive, connected the RS232 cable and connected with hyperterminal
rekindled the demo and you should see the boot sequence demo and it will stop all alone when she vera not usb
and will remain on the console of the CFE (bootloader)
make it simple to troubleshoot as sa
unsetenv STARTUP
and rebooted and the demo in Redem flach
news :
if something goes wrong you need the rs232 cable with version 38, unzip the file-repair-vuplus env.zip on a USB key formatted in fat, made as if you flash the demo at the end there is a continuous message something's come, from there you can remove the USB drive and reboot, and start again on the flash demo
Thanks gigi
احدث توليفة للدريم بوكس الانيجما E1 بتاريخ اليوم 28-12-2010 Dreambox TM Settings
Power-Board Enigma 2 VX dm 800 02/04/2011
TS-Doctor New version 1.2.5
Pre-Release versions of ProgDVB v6.63.8
Merlin-3 OE2.0 dm800 update 21/10/2014
vPlug_Server_v1.0.1.1 02-1-2011
Skin Zombi.HD1R3 for GP3.2 v7.1
SIF TeAm Enigma2 Jackal Dm500hd 20/1/2013
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.