العودة   منتديات دريم بوكس > الأجهزة وعالم الفضائيات > الفضائيات > أرشيف قسم أجهزة الشيرنج الفضائي

أرشيف قسم أجهزة الشيرنج الفضائي DC 2000 - CASPER - DRUMMER - me2000 - draek star - ibox Dongle - Y4 Gold - Y6 - Y5- Microbox- alpha - morebox -Dark-Red Box- timer - EG - mini x-1

  1  
ThE MaStEr

Step 1:


- Connect the MicroBox dongle to the power, and make sure its turned on ( Red light inside it ), after that connect the serial port from the MicroBox to the serial port, in your PC.
Step 2:

- Download the cleaner software for the downloads section, then open the .rar file and you should be able to see the below files, open the cleaner.exe file.

Step 3:

- After you have the program opened click START button, then you should see that a "Waiting Boot..." is showing up near the software title, as the below image shows.

Step 4:

- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the cleaning process is started, as the below image shows.

Step 5:

- Once the cleaning process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again.
Step 6:

- Now download the software that you want to install from the site, then open the .rar file as below.

Step 7:

- Open the .exe file, which is the software it self.
Step 8:

- After you have the program opened click START button, then you should see that a "Waiting Boot..." is showing up near the software title, as the below image shows.

Step 9:

- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the transferring process is started, as the below image shows.

Step 10:

- Once the transfering process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again, and by this you have the software installed at your MicroBox Dongle.

Hope this was useful for you.

Regards,
mana5olia




How to Install MicroBox II Software:






Step 1:


- First of all if you have MicroBox I, you have to convert it to MicroBox II, so what you need to do is to download the Loader software form the softwares section, you will see the file as below:

Step 2:

- Now as you can see in the above picture, choose your configuration, like the port that you want to use, in our case its COM1, and the mode as well, download, Dump, Erase. In our case we want to download the file so we should choose download. After that click browse and locate the .bin file that you want to download, e.g download the W3 software and locate it from the downloader.

Step 3:

- Now click download and the downloading should start automatically, so depends on the software the you choose, you dongle will be updated upon that. Once you are done, reboot your dongle and you should be fine.

Thanks,


أقرأ ايضا .. قد يعجبك :

أكتب تعليق على الموضوع مستخدماً حساب الفيس بوك

ضع تعليق باستخدام حساب الفيس بوك

من مواضيعى فى المنتدى

OoZooN-Image-dm500hd-3.1.0 24.03.2011
شفرة Barca tv (10 °E) biss keys
OoZooN Image for dm500hdv2 update 7-9-2013
ProgDVB v6.51.6
OoZooN v3.2.2-dm800-ramiMAHER #ssl84b
Dream Elite 4.0 For dm800 Ver 001r002
بتاريخ اليوم 2-10-2013 اصدار البروج ProgDVB 6.95.5
Dream-Elite-3.0-Ver010_25-03-2012-DM800se-20120323-ssl84b-sim210-by sat4fun



طريقة تحديث دنجل المايكروبوكس





رسائل حب | صور حب | صور بنات | صور 2017 | صور ورد | صور ساخنة | صور اغراء | فساتين سوارية | تسريحات شعر | قمصان نوم | قصات شعر | عبايات 2017 | صباح الخير | مساء الخير | كلام جميل | كلام حب | صور مكتوب عليها | جمعة مباركة | حظك اليوم | بوس شفايف | تردد قناة | ترددات النايل سات | يوتيوب | كلمات اغنية | كريستيانو رونالدو | جورجينا رودريجيز
DMCA.com Protection Status
الساعة الآن 03:27 AM.


Powered by vBulletin Version 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd
Support: منتديات دريم بوكس