منتديات دريم بوكس  

العودة   منتديات دريم بوكس > > >

VU+ Solo كل مايتعلق بـ VU+ Solo من صور وتطوير وشروحات وتطبيقات

  1  
ThE MaStEr

Latest Bootloader Solo CLONEBecause the new images uses the latest kernel Version 3.1.1 the bootloader of the Solo & Duo most be updated.

Here is the bootloader for the Solo.
After the bootloader update the latest image with kernel 3.1.1 can be used.


* UPDATE AT YOUR OWN RISK *

Update Solo:

The CFE image of Vu+ Solo is updated.

The main difference from the old one is supporting the large size image more than 48MB.

Please see the detailed explanation of update as below.

Unzip the cfe_solo_2.0.zip to USB stick. (There should be /vuplus/solo/cfe_cfe_auto.bin)
Insert USB stick into the USB port of solo and power on the box.
It takes just a few secs to update.
If solo's front led blinks continuously, restart box.
To proceed with image update, you should delete the cfe_cfe_auto.bin at /vuplus/solo in USB stick once bootloader update is finished.


أقرأ ايضا .. قد يعجبك :

من مواضيعى فى المنتدى

Merlin3 DM800 February 02 2012 Sim201 SSL84b
Black Hole Vu+ Duo 1.7.2 media-tree
تحميل درايفرات أجهزة Vu+ بتاريخ اليوم 24/12/2013
ProgDVB v6.73
Comedy Central Poland inks WB output deal
DreamConcinnity mod by crash
Dreambox Key 09.04.2012
TSmedia OE2.0 userstream.xml updates

  2  
ThE MaStEr

HOW TO - Latest patch for solo
Please read the steps few times before starting.You better do not disconnect the rs232 cable and small board.Use windows XP and DO not use a usb2serial it won't work

- Step 1
Keep the box Powered OFF

- Step 2 Updating of Secret chip
Please make update of the secret chip.Use renewaes solo software (secupd111230.exe) to update it.Connect RS232 small board with RS232 cable to computer COM port.Then run secupd111230.exe (please take a note of the right COM port) , and open solo scret.bin file and THEN Power ON solo receiver.You will see update progress bar- Wait till it finish and then close it.Power OFF the box.

- Step 3 Updating of Flash chip
Box remaining in OFF position.
Please make update flash chip.Connect RS232 small board with RS232 cable to computer COM port(if you had remove it by any reason). Start renewflash.exe, and choose upflash120227.bin file and hit the UPDATE button, THEN Power ON solo receiver. You will see update progress bar- Wait till it finish and then close it.Leave the box as it is.

- Step 4 -Erase Flash chip.
Connect RS232 small board with RS232 cable to computer COM port(if you had remove it by any reason).Run ERASE126.exe and click ERASE button.Power OFF and then Power ON. Do NOT do reset of the box.
You will see update progress bar- Wait till it finish and then close it.Power OFF the box.
Those are all steps for the updates

- Step 5 Loading CFE boot loader
Use cfe_solo_2.0 file -load it to a usb pen drive and then, make update.

- Step 6 Flashing Image
Choose your Favourite image load it to the usb pen drive and then ,make update.


Thanks to Ferrari Team.



من مواضيعى فى المنتدى

BK D.M.S img dm7020hd OE2.0 1.8
WiCardd-108pre 30-01-2011
BlackPole OE.2.0 VU+ Ultimo v.1.0 usb 1.0
بتاريخ اليوم 14-10-2013 اصدار البروج ProgDVB 6.95.7c
OoZooN Image dm7020hd update 19-11-2013
Experimental image DM500 HD based on OE 1.6 01/01/2011
جديد بتاريخ اليوم TS-Doctor Version 1.1.19
ItalySat3.0 for DM8000 SVN 045

  5  
krimozak

شـكــ وبارك الله فيك ـــرا لك ... لك مني أجمل تحية .



من مواضيعى فى المنتدى

Vu+ solo Update open source released of 12/03/2012
Black Pole Vu+ Solo 0.1.1


أدوات الموضوع



الساعة الآن 04:20 AM.


Powered by vBulletin Version 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd
Support: منتديات دريم بوكس