BlackHole Vu+ Duo 1.6.3 DTS Backup @isayuksel

First, download the latest version of which is for usb cihazımıza installing the new image: (1) Vu + Duo USB with the image install is

Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings


Seçilidi HDMI.
1080i is selected.
Turkish language was chosen.
DHCP on the network.

Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.

To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create

We check our config for the network.

Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.

Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.)

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is

Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).


Twin VU + Duo & Solo & ET-9000 HDTV channel in the channel settings in the Setting loaded. @ Galaxy2002

Be sure to reboot after installing the device to the channel settings.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.



Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 °

Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.


Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons you can mark (or remove).



Add-on manager;
PermanentClock under the System category (not active),
Setpasswd under the System category (the password is assigned),
StartUpService under the System category (Channel D),
VlcPlayer under the Software category,
SimpleRSS under the Multimedia category (not active),
VirtualZap under the category of multi-media (press and hold the arrow),
Plugin Weatheer under the Multimedia category,
YouTubePlayer established under the Multimedia category
Image management under the category has been removed VideoTune

Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.

Also in line with our desire to make a simple config for:



Menu> Setup> System> Audio / Video settings
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Menu> Setup> System> Customize section, change the user experience as an expert in the Green Key (OK) to acknowledge.

Determination of the initial channel



Channel List, while the point of the channel you want to begin the startup.

Press the Menu key.

The drop-down set of options, press the OK button on your remote control by pointing to service as stratup.

When you restart your device to open the channel you want.

If you want to cancel this operation, ie if you want the latest on what channel you turned off the opening of the channel;

While the Channel List, press the Menu key.

Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.


set as the startup service: Channel D



When you want to set up as external plugins. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow, then the drop-down menu, press the "Manual Install Ipk packges" on your remote control by pointing to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.



tunisiasat manager_3.0 download-addons-founded.



Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (2.0) and then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c



enigma2-plugin-extensions-dreamexplorer_7.3_mipsel.ipk was downloaded.


enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and




Nstreamplayer plugin was 0.3.


WebMedia plugin was downloaded. (@ Niendorfer)



Zap was founded in pips. @ Ozkaradag



Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette
Code:

Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *

give the command.
If the installation fails again, try to give the following command:
Code:

ipkg update



Emu are doing the installation of:

E2_CCcam_2.2.1_bh download file such as / tmp folder, send out the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.

Making settings for the installation and Bulsat mgcamd:

1) E2_Mgcamd_135a_bh download file (the file will not open), as in the / tmp folder, send the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.

2) Patched by mgcamd_1.35a Bulsatcom pinkyto0o Enigma2 zipten çıkarıyoruz download file. Zipten extracted in the folder
mgcamd_1.35a file via ftp / usr / bin under the taking. (Overwrite the existing file we print) the value of the file chmod 755 do.

3) add-ins come with the green key. Hacksat-k e y-Downloader plug-in point, the key Emuler Update> Mgcamd-key update to download CCcam Kéylerini do.

4) Black Hole Blue Panel also kumandamızın blue key left / right arrow keys to find the Mgcamd-1.35a. Kumandamızın We press the OK button. Mgcamd-1.35a is activated by pressing the OK kumandamızın even necessarily need to rerun.


CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.

Backupda active glass: Mgcamd, CCcam server you should use a cccam2.2.1 active. Server to enter a look at the following post:

CCcam.cfg enter a file server

If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Manager Addons> Addons Download Manager> Black Hole E2 Image Skins section can come in different skins.

I gave the following link if you want to change the threads by taking advantage of funding and radio bootlogo:

Vu + bootlogo replacement program and the use of ...

If you want to install picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, ndirdiğiniz zipten remove the folder / usr/share/enigma2 / directory should be submitted under. There is no Backupta.

Other thin configuration.

Menu> Setup> System> Customize
Alternative to Radio Mode yes
Show times yes to the EPG channel selection screen
After assigning values ​​Kumandamızın Green Key (OK) to acknowledge.

After you install the backup settings and plug-ins take the VU + 'ta Duo & Solo USB and backup at NFI