سؤال كيف طريقة تنزيل enigma2 على جهاز azbox premium hd
-
خالد المناصير
2012-02-15
-
السلام عليكم
عندي جهاز azbox premium hd
وعليه السوفتوير الاصلي
واحب ان انزل enigma2
نزلت سوفت جديد enigma2
RTi_Core_1.6.0
ما هي الطريقة لتنزيل السوفت وير على الجهاز
حاولت انزل السوفت وير على الجهاز عن طريق usb لكن ما ظبط معي
لاني لا اعلم كيف الطريقه لكي انزل السوفتوير على الجهاز عن طريق usb او عن طريق برنامج اخر
يوجد هنا طريقه الشرح وترجمتها الى اللغة العربية ولكن لم افهم منها شيئا
These are the Howto steps for official FW on USB. Works in RC7, RC8, RC9..
All credits to Telesat and Johnsat
1) Format USB-stick FAT32, and place in Azbox running E2
2) Use Azup 2.0.1 (no other)
Dowload nessecery files here: http://azupd.ath.cx/fw/files/fw (includes Azup 2.0.1)
3) In azup, check 'USB', uncheck 'copy kernel'
4) Press 'Install Official FW'
5) Box comes in rescue mode after reboot, Press 'Install Official FW' again (IP-adress should be the same as running E2)
6) Select file 'vmlinux'
7) Select file 'patch.alt' (this is 0.9.5300 fw)
8) Azup continues and several log messages appear, wait till it shows 'FW installed succesfully'
9) Wait for reboot, VFD will show this:
* USB CHECK
* RESCUE MODE?
* CHECKING
* SLEEP 15 S
* CHECKING
* USB S
* LOADING
And the official FW has started, if all goes well the settings screen will appear and azbox can be configured.
This is working 100% in my box (premium HD). Try another USB-stick when it fails.
Hehe heb het nu werkend FW op de USB stick met RC8 op de dom.
Wat heb ik gedaan?
Heb een 4Gb usb stick geformateerd in systeembeheer van windows fat 32
Azbox draaiend op RC8 en de usb stick erin gezet
Azup 2.0.1 geinstalleerd(elke andere werkt niet)
* USB aangevinkt
* Copy kernel vinkje weggehaald
* Bij Install Official FW op go gedrukt
* Dan krijg je de melding dat hij in rescue mode word gezet
* Ip blijft gelijk als je al had in je box
* Als hij in rescue mode staat wederom op go drukken
* scherm opent en je selecteerd vmlinux
* scherm opent weer en je selecteerd patch.alt
* nu gaat hij van start en creerd de partities.
* Dan sending fw naar azbox
* copie Fw naar de box
* Wacht rustig af tot je een popup krijgt FW succesvol geinstalleerd
* wacht tot je Azbox reboot.
*Dan zie je het volgende gebeuren
* USB CHECK
* RESCUE MODE?
* CHECKING
* SLEEP 15 S
* CHECKING
* USB S
* LOADING
* EN ZIEDAAR JE BOX START NU OP MET ORGINELE FW
Als je nu met een ftp programma gaat kijken zie je de oude vertrouwde files in je box staan
Vervolgens heb ik met MAZ 2.0.2 alles wat nodig is geinstalleerd
En je kunt weer kijken.
Heb hier een setje met files toegevoegd,daar er heel wat files op het net zwerven die echt niet werken
Hoop dat het jullie nu ook gaat lukken.
cheers Johnsat
ارجو منكم الخدمه الشرح بالصور
او بالكتابه
تحياتي لكم
سؤال كيف طريقة تنزيل enigma2 على جهاز azbox premium hd
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.