What is new - apart from the fix for the 'serious' error with the minimum image size :-) We can now turn up on blue swap partition will then take a swapfile in a separate partition image (3rd primary) made with the set amount of swap. (!) And extra for Speedster can now if still space on a remaining partition is turn up (that's the 4th Primary) - for the mounting of the latter, you have to you but take care please himself, possibly you can have a matching label propose this at the moment it is simply formatted as ext3 and unlabeled, and therefore usually to be found in / autofs/sdX4. Note - all these new partition settings work only when the image size is NOT 0, because 0 (which also is the default) means yes as usual, that the image on the FAT the whole device gets, so no swap partition still remaining partitions are possible. Please test if this works as it should and now I do not have built too many new bugs, because I would get nice and slow like 0:25 and stable again. PS: probably the fastest Boot partition image about 512MB and 128MB swap partition without rest, but you can now try out myself - so my 8000 will stick to pretty much exactly one minute from the internal SATA boot time, even without qWickie - Fascinating :-)