Installation and initial settings: we do:
First of all, the latest version of the new image to usb cihazımıza install all the picture Vu + Solo Installation Instructions for USB Stick
Settings: after installation to be done after installation: (2) initial installation settings Vu + Duo
Language Turkish is selected.
DHCP on the network.
At this point you can call the channel list or channel can install ready. If you want to make the tuner settings before you have to do a channel scan.
For more information about how to channel call: (4) Create the favorite channel search and Vu + Duo
Network settings: in-house.
Menu> Setup> System> Network section of the "Network hardware settings" to come on the kumandamızın "OK" button pressed.
Under the section for the current settings to take note of the IP address. (Value not to enter this ip will need to install the channel setting.)
If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
Now you can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
TurkuazPanel Backupda Channel List from the installed.
VU + Plus the current channel setting on the HDTV Channel Setting is loaded.
(April 7, 2012 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2)
Be sure to reboot after installing the device to the channel setting.
Menu> Setup> Satellite Configuration> Settings section to come Tuner Tuner configuration.
Tuner A: (Basic) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Note: Notice that after installing before the tuner ayarlamızı made our list of channels. Thus, because of the possible names of different satellites, satellite broadcasts that can be taken in setting we have prevented errors.
Extension (plugin) We install:
Menu => Add-ons section to come Kumandamızın Red button (Add-ons) are pressed. Updating the software catalog for a while after their stay at the screen a message that says the system will be a list of plugins into categories. Any point to a category add-ons in that category will be listed when you press the OK button on your remote control. Dimmer can be installed here ekelentilerdir olanalar installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
PermanentClock under the System category,
Setpasswd under the System category (The password is assigned),
StartUpService under the System category (Channel D),
VLCPlayer under the Software category,
SimpleRSS under the category of Multi-media (not active),
VirtualZap under the category of Multimedia,
Plugin Weatheer established under the Multi-media category.
Install (or uninstall) you want to restart after the operation istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the devices, reboot, while providing Kumandamızın.
In line with other simple settings: do we want:
Menu> Setup> System> Audio / Video settings
Go to the content of 4:3 as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Menu> Setup> System> Customize section, change the user experience as a specialist in Green Key (OK) and acknowledge.
Initial determination of channel:
While the point of the channel you want to begin startup the Channel List.
Press the Menu key.
Service options in the drop-down set point as stratup press the OK button on your remote control.
Channel you want your device will restart.
If you want to cancel this process, ie if you want the latest on what channel you turned off the opening of the channel;
While the Channel List, press the Menu key.
Open the options and press OK on your remote control point to reset the startup service option.
set as the startup service: Channel D
Panel Addons Manager can install some plugins are not GH Extension Manager. For this purpose;
Press the green and yellow, respectively Kumandamızın BH Addons Manager panel and select a row to come. While here kumandamızın Addons Download Manager by pressing OK on the pop-up in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While this too, we want to install add-on and then we press the OK button kumandamızın. Plugin will display information about where the short explanations. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın by pressing OK on the setup screen, yes, done.
Enhanced Movie Center v3.0.0, v6.0 Sherlock WebMedia was 5.0.
You can set up as described above, Apple Trailer v1.0 addons Mangere. This extension has not been Backupta. Must have on your hdd for this extension to work. Hdd during installation are also folders. Caused by addons with this panel or the / tmp directory needs to be established.
Want to install external plugins. Ipk file via ftp / tmp directory of the remote, first green, then yellow after laying the drop-down menu, press the "Manual Install Ipk packges" remotes come on "OK" button. Will want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.
Established Turkuazpanel_0.6.3_mipsel.ipk ..
ShowClock established. Press and hold the exit button.
V.1.2.1 Buyukbang Panel was established. (@ Exenonline)
manager_3.0 download tunisiasat-addons-founded.
After you restart the device on;
Menu => Extensions => tunisiasat-come first to addons-manager_3.0 livefootball (3.6b), and then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the plugin was CCcam Info V1.3c
Emu are doing the installation:
As E2_CCcam_2.3.0_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.
CCcam.cfg file / etc folder is located under. Server uses the knowledge of this must go to the file server.
Entering information in the file server Cccam.cfg
As E2_Mgcamd_138_bh.tgz file download / tmp folder, delivered below. Black Hole in the Addons Manager (kumandamızın to come to this section, we press the green and yellow button) Manual Install Bh kumandamızın packges point we press the OK button. While on our file and press OK to re-kumandamızın uşuna press OK on the setup menu that are doing well, yes.
070 v4 Btkcam established manually. btkcam.cfg file / usr / k e y s are. Blink is not available. Need to add yourself.
btkcam_mips file in / usr / bin, do chmod 777 to send.
Ncam_Btkcam.sh file in / usr / folder, send camscript doing chmod 755.
biss.cfg file in / usr / k ey s folder, send and do chmod 644.
btkcam.cfg file in / usr / k ey s folder, send and do chmod 644.
K ey installer do the establishment and key updating procedures:
hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;
export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / hacksat *
We give the command.
If the installation fails again, try to give the following command:
After installation, update k ey are doing.
And other settings: kurulumlarımızı do.
If you want to install the first green and then yellow skin and press on your remote control. Black Hole Addons Manager> Addons Download Manager> Black Hole E2 Skins Image section can come in different skin.
If you want link given below and radio fund bootlogo change by taking advantage of threads:
Vu + Bootlogo replacement program, use, ready bootlogolar ...
If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download the file picon the subject. Unzip the downloaded folder or folders, remove the / usr/share/enigma2 / picon folder if you have placed in the directory, or create a folder called picon into this folder will need to send the file permission after making 755.
Eutelsat set Picon Turksat loaded.
After you install the backup settings and add-ons get: VU + 'ta get backup Duo & Solo USB and NFI
Hdd or usb device with the Main Menu BlackHole Full backup can backup.
Turquoise Backup Panel are from.
Menu> Add-ons> Turquoise panel> Backup / Restore> Full Backup HDD / USB (Vu Plus series)> Full Backup HDD