changes to my BDC_ATR_Restorer WinExplorer script.
This will NOT resurrect a card that has been killed with a killer BDC file.
However, it wants to restore the ATR to a BDC Which is stuck in application mode and the Dragon Loader can not erase or detect it.
You must use a Phoenix interface, initially at 6:00 MHz, ideally in a 'real' rs232 comport. Then, when prompted, change to 3:57 Mhz and run the script again. It works fine for me with a CAS3 interface.
Please give feedback on any success or not.
[/ Original_]
This script is used to a no longer existing ATR restore a blue dragon card.
This script does not help if the card has been described with a so-called killer BDC file.
instructions:
- Card in a Phoenix Programmer, ideally with a real RS232 Com port, not usb
- Set to 6 MHz
- Script can be run
- When asked to move to 3.57 MHz
- And let the script run through again
Should work with a CAS3 wundertbar.
LinkBack URL
About LinkBacks