Thread Back Search

Official Image Backup @isayuksel Vu Solo 08.12.2011

  • ThE MaStEr
    2011-12-12




  • Official Image Backup @isayuksel Vu Solo 08.12.2011

    كود:
    Installation and initial settings::
    
    First, download the latest version of the new image for usb installing cihazımıza: Vu + Solo USB Stick Installation Instructions for the picture
    
    After the setup wizard after installing the software is encountered. At this stage, I just do the language selection. Other transactions without getting out of the wizard.
    Quote:
    
    Language Turkish is selected.
    
    We check the network settings using.
    
    Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.
    User Interface: yes
    Use DHCP: yes
    
    We take note of the IP address of the current settings section.
    
    If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure
    
    I need to do some adjustments in order to install Channel List.
    
    Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
    (Menu => System => Customize section) Enable the use of multi-bouquet "yes" to change. Kumandamızın green button to save the changes (OK) is pressed.
    
    Again, we can do with the channel setting, install, and the computer for other tasks "Webinterface" plug-in needs to create.
    
    For this
    Menu => Plugins => Green Key (Attachment Download) A is pressed.
    Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.
    
    Here, under the extensions section "Webinterface" plug-in point to the OK button is pressed kumandamızın. "Extensions-Webinterface" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.
    
    "Practice is over" key to exit kumandamızın are going to see the text.
    
    Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).
    
    Quote:
    
    VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
    (November 14, 2011 4 Satellite: Turksat, Hotbird, Astra EutelsatW3 and 19.2) @ galaxy2002
    
    Channel setting is sure to reboot after installing the device.
    
    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
    
    Quote:
    
    A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
    
    Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.
    
    Add-on (plugin) installs are doing:
    
    We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plugin from scratch.
    Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Do you want to download the plug-in? A message will come in the form. kumandamızın yes option while on the "OK" button is pressed.
    
    "Practice is over" key to exit kumandamızın are going to see the text.
    
    Us to establish this, more add-ons management (remove more options and add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.
    
    Quote:
    
    İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.
    
    
    Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will Changeable first attracted our attention. Add-on with setting up and removing the key from the dropdown menu will no longer red.
    
    
    Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons by checking the set up here (or remove).
    
    We are under the System category "StartUpService" i, under the direction of the image "videmode" select plug-ins. With red button (back), she next to red button (Close) are going. "Add-on Management activity information" window, choose plug-in (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.
    
    
    
    Because when we started again we set up our device with plug-in power-videomode connection settings will be related to the shape and resolution.
    
    Quote:
    
    HDMI is selected.
    1080i was chosen
    
    Image configuration.
    
    Quote:
    
    Menu> Setup> System> Audio / Video settings section to come
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just Scale
    changed to. Green Key (OK), with the changes noted.
    
    
    Quote:
    
    Under the System category, hotplug,
    PermanentClock under the System category,
    PositionerSetup under the System category,
    Satfinder under the System category,
    Setpassd under the System category,
    VideoEnckancment under the System category,
    VlcPlayer under the Software category,
    Autoresolution under the category of multi-media,
    MyTube under the Multimedia category, was founded.
    
    
    Quote:
    
    Time zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D
    
    Whenever you install plugins as external. Ipk file via ftp / tmp directory, take, then give the following command telnet device to restart and finally enough.
    
    Code:
    ipkg install / tmp / *. ipk
    Quote:
    
    turkuazpanel_0.3.2_mipsel.ipk established.
    
    Quote:
    
    Nstreamplayer was 0.3 plugin.
    
    Quote:
    
    enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established
    
    Quote:
    
    ShowClock established. exit, press the key long-term.
    
    Quote:
    
    BitrateWiewer established.
    
    Quote:
    
    Sherlock was 5.0.
    
    Quote:
    
    enigma2-skin-hdglass16_3.91_mipsel.ipk established.
    
    Quote:
    
    enigma2-plugin-extensions-enhancedmoviecenter_3.0.0_all.ipk established.
    
    Quote:
    
    enigma2-plugin-glasssysutil_4.03_mipsel.ipk established.
    
    Quote:
    
    tunisiasat-addons-manager_3.0 was downloaded.
    
    Quote:
    
    enigma2-plugin-usb2ram-1.5beta.ipk established.
    
    Enigma2 plugin extensions are not included in Backupda appletrailer mipsel.ipk 0.1 plug-in as described above, download and build it. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This is caused by ftp with the / tmp directory after sending telnette ipkg install / tmp / *. ipk to be established by executing the command.
    
    Emu are doing the installation:
    
    Note: Emu setup was easier than the glasssysutil. In this case, you need to do CCcam.cfg file / etc directory under the server by entering the edit information.
    
    CCcam 2.2.1 Backupda glass was selected as active.
    
    After pressing the Blue button to change the list of the add-on Emu Glass-UnivCam emuları Manager section, select the other active can come.
    
    CCcam.cfg enter a file server
    
    Quote:
    
    CCcam 2.2.1 was
    Mgcamd was 1:38.
    
    key establishment and key update installer we also deal with:
    
    Hacksat-keys-downloader-e2_1.1-30102010_mipsel.rar download the update, do k.ey.
    To set up Hacksat telnette
    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    
    Kurulumlarımızı our config and do the other.
    
    I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:
    
    Vu + bootlogo replacement program, use of ready-bootlogolar ...
    
    If you want to download picon file. Türksat_Hotbird_Astra19_Eutelsatw3 picon file download, download folder, remove zipten / usr/share/enigma2 / directory should be submitted under. There is no Backupta.
    
    
    Settings and add-ons installed, then take the backup: VU + 'ta Duo & Solo USB and backup at NFI
    
    In accordance with the above description is taken from the backup file present for Solo Vu:
    After the installation proceed as follows:

    Be using empty after formatting it as fat32 a usb cihazımıza takıyoruz our memory.



    Menu> Add-Ins section of the USB plug-in RAM memory as we come on.



    In the menu that Active meat option while on the Kumandamızın OK key is pressed.



    RAM will be formatted and ready to use that memory for the USB yenşden. USB our memory anymore. Similar



    Menu> Add-ons> Add-ons (red button) come to the section. network under the WebBrowser point to plug Kumandamızın OK key is pressed. After pressing the red button twice to set the OK key is pressed.



    We expect to complete the installation.



    We provide our device a reboot after installation.



    menu> Add-ons kumandamızın WebBrowser, point to the OK button is pressed.



    In this section we do not control use a Changeable. If you use a keyboard mouse
    Mouse USB Mouse
    Keyboard USB Keyboard options, select the green button is pressed Kumandamızın.



    Ready to use the WebBrowser.




    We use the virtual keyboard key for the kumandamızın yellow.


    navigation are good looking and good.



    Download

    Thanks isayuksel


    من مواضيعى فى المنتدى

    Talking set-top

    مفاتيح باقة ال osn بتاريخ اليوم 6-1-2011

    Xbox Kinect to support Sky player

    Softcam keys 01.03.2011

    Ferrari-SSL83F-Nemesis2.4-dm8000-e2-OE(1.6)-SVN 099r1

    Experimental image DM800SE OE 1.6 20-01-2011

    السوفت كام اليومي Softcam Keys 26-09-2011

    New Open Source Server is Now Runnig VU+Duo 17.01.2012


مواضيع متشابهة

Official Image Backup @ isayuksel 29.12.2011 Uno Vu

Official Image Backup @ isayuksel Wu Duo, 22.12.2011

Official Image Backup @isayuksel Vu Uno 08.12.2011

Official Image Backup @isayuksel Vu Duo 08.12.2011

Official Wu solo Image Backup 5.10 @ isayuksel


Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.