Thread Back Search

Official Wu Duo 5.10 @ isayuksel Image Backup

  • ThE MaStEr
    2011-07-16




  • Official Wu Duo 5.10 @ isayuksel Image Backup

    First, download the latest version of which is for usb cihazımıza installing the new image: (1) Vu + Duo USB with the image install is
    After the setup wizard after installing the software is encountered. At this stage I'm only language choice. Other transactions without getting out of the wizard.
    Quote:

    Turkish language was chosen.

    We check our config for the network.

    Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
    User Interface: yes
    Use DHCP: yes

    We take note of the IP address of your current settings section.

    If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is

    Channel List in order to install I need to do some adjustments.

    Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
    (Menu => System => Customize section) Enable the use of multi-bouquet "yes" as a change. Kumandamızın green button to save the changes (OK) is pressed.

    Again, the channel setting, install, and we can do with the computer for other tasks "Webinterface" needs to create plug-in.

    For this
    Menu => Accessories => Green Button (Download Extension) a is pressed.
    Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

    Here, under the extensions section "Webinterface" plug-in came on the OK button is pressed kumandamızın. "Extensions-Webinterface" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.

    "Practice is over the text" key to exit kumandamızın are going to see.



    Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).

    Quote:

    Twin VU + Duo & Solo & ET-9000 HDTV channel in the channel settings in the Setting loaded. @ Galaxy2002


    Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

    Quote:

    Tuner A: (simple) Not set, as desired.
    Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 °


    Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.



    We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plug-in from scratch.
    Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.

    "Practice is over the text" key to exit kumandamızın are going to see.

    Us to establish this, more add-ons management (more options and removing add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.

    Quote:

    İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.


    Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will be first noticed Changeable. Add-up and drop-down menu and we will remove the red key now.


    Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons you can mark (or remove).

    We are under the System category, "StartUpService" i, under the direction of the image "videmode" plug-ins are choosing. With red button (back), she next to the red button (Close) are going. "Add-on Management activity information" window, choose Add-In (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.



    When we started re-opening the connection with the reason we set up our device videomode plugin settings will be related to the shape and resolution.

    Quote:

    HDMI is selected.
    1080i was chosen

    Image configuration.

    Quote:

    Menu> Setup> System> Audio / Video settings section to come
    4:3 content is as follows: Just Scale
    > 16:9 content is as follows: Just Scale
    changed. Green Key (OK) were recorded with the changes.


    Quote:

    Blindscan under the System category,
    CommonInterfaceAssigment under the System category,
    Hotplug system under the category,
    PermanentClock under the System category,
    PositionerSetup under the System category,
    Satfinder under the System category,
    Setpassd under the System category,
    VideoEnckancment under the System category,
    VlcPlayer under the Software category,
    Autoresolution under the Multimedia category,
    EasyMedia under the Multimedia category,
    MyTube under the Multimedia category,
    SimpleRSS under the Multimedia category,
    VirtualZap under the Multimedia category,
    WeatherPlugin under the Multimedia category,
    YouTubePlayer established under the Multimedia category

    Quote:

    Menu> Add-Ins> Manage Add-ons (Red Button)> Visual Interface "Kern-HD1R2" was established. The interface has been activated

    Emu are doing the installation of:


    Quote:

    Just leave çıkartıyoruz vu_cccam_official.zip file download. Folder in the files by ftp as described below cihazımıza yollayıp chmod values ​​are holding.

    1) S99-cccam.sh file etc/rc3.d / under throw chmod 777 of the value of the offer.

    2) K01-cccam.sh file etc/rc4.d / under throw chmod 777 of the value of the offer.

    3) CCcam file usr / bin / chmod threw under: 755 offer good value.

    4) SoftCam.k O file usr / keys / under throw Chmod: 644 offer good value.

    5) CCcam.cfg file etc / under throw Chmod: 644 offer good value. (Of course, we organize ourselves according to)

    6) cccam.prio file etc / under throw Chmod: 644 offer good value.

    Note: The panel from the TS can also make it easier to install Emu. In this case, you need to do CCcam.cfg file / etc directory if you have below will send a server by entering bilgilerinizide.

    Quote:

    Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
    set as the startup service: Channel D

    When you want to set up as external plugins. Ipk file via ftp / tmp directory, take, then give the following telnet command to restart the device, and finally enough.

    Code:
    ipkg install / tmp / *. ipk
    Quote:

    tunisiasat manager_3.0 download-addons-founded.

    Quote:

    Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (2.0) and then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c

    Quote:

    enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.

    Quote:

    enigma2-plugin-extensions-subtitleplayer_3.05_mipsel.ipk file was downloaded and

    Quote:

    Nstreamplayer plugin was 0.3.

    Quote:

    WebMedia plugin was downloaded.

    Quote:

    Zap was founded in pips. @ Ozkaradag

    Quote:

    EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) Was the subject of using the EPG Exporter plugin ...

    Quote:

    Established TSpanel 2.0.

    Quote:

    Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
    To set up Hacksat telnette
    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    If the installation fails again, try to give the following command:
    Code:
    ipkg update

    Official Wu Duo 5.10 @ isayuksel Image Backup

    Official Wu Duo 5.10 @ isayuksel Image Backup

    Official Wu Duo 5.10 @ isayuksel Image Backup

    Official Wu Duo 5.10 @ isayuksel Image Backup


    DOWNLOAD USB


    DOWNLOAD NFI


    من مواضيعى فى المنتدى

    Softcam keys 14.12.2011

    DE OpenBlackHole Ferrari dm8000 DTS CrossEPG DynDNS Cron DEBHGUI SSL83F

    Sony unveils Internet TV STB

    v_keys.db 02.09.2011

    HD Glass16 ver. 3.66

    NaviBar *HD ONLY* *OE2.0 only Update 15.11.2012

    New news programme launched by TWR-UK

    ملف قنوات دريم بوكس انيجما 2 بتاريخ اليوم 31.01.2012


مواضيع متشابهة

Official Image Backup @isayuksel Vu Uno 08.12.2011

Official Image Backup 6.0 Uno Vu @ isayuksel

Official Wu Duo 5.11 @ isayuksel Image Backup

Official 5.11 Vu Uno Image Backup @isayuksel

Official Image Backup 5.9 @ isayuksel


Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.