First, download the latest version of the new image to usb cihazımıza installing: Installation Instructions for the picture Vu + Solo USB Stick
Needs to be done after the installation, after installation, settings::
1080i is selected.
Turkish language was chosen.
DHCP on the network.
Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.
To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create
We check our config for the network.
Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
Under the section for the current settings to take note of the IP address. (Channel settings will need to install I could enter the value of the rope.)
Now we can install Settingimizi Channel:
Twin VU + Duo & Solo & ET-9000 HDTV Channel Setting Uploaded on 27 June 2011 the channel settings. @ Galaxy2002
Be sure to reboot after installing the device to the channel settings.
Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons you can mark (or remove).
Setpasswd under the System category is assigned a password.
System under Channel D StartUpService
Under the Software category VlcPlayer
YouTubePlayer established under the Multimedia category
Image management under the category has been removed VideoTune
Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.
Also in line with our desire to make a simple config for:
AIN MENU> Setup> System> Audio / Video settings
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just after the green key to making Scale (OK) acknowledge.
Menu> Setup> System> Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
After setting up the Green Key (OK) and acknowledge.
Menu> Setup> System> Customize section, change the user experience as an expert in the Green Key (OK) to acknowledge.
Initial channel identification:
Channel List, while the point of the channel you want to begin the startup.
Press the Menu key.
The drop-down set of options, press the OK button on your remote control by pointing to service as stratup.
When you restart your device to open the channel you want.
If you want to cancel this operation, ie if you want the latest on what channel you turned off the opening of the channel;
While the Channel List, press the Menu key.
Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.
set as the startup service: Channel D
Emu are doing the installation of:
E2_CCcam_2.2.1_bh download file such as / tmp folder, send out the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.
CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.
CCcam.cfg enter a file server
Making settings for the installation and Bulsat mgcamd:
1) E2_Mgcamd_135a_bh download file (the file will not open), as in the / tmp folder, send the bottom. Black Hole in the Addons Manager (green and yellow kumandamızın key is pressed to come to this section), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file and press OK again kumandamızın uşuna the menu, and select OK on the setup, yes we do.
2) Patched by mgcamd_1.35a Bulsatcom pinkyto0o Enigma2 zipten çıkarıyoruz download file. Zipten extracted in the folder
mgcamd_1.35a file via ftp / usr / bin under the taking. (Overwrite the existing file we print) the value of the file chmod 755 do.
Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.
If the installation fails again, try to give the following command:
Settings and add-ons installed, then take the backup:
VU + 'ta Duo & Solo USB and backup at NFI
Prepared for the backup link in accordance with the above description giving VU + solo. Who want to download and install and review
BlackHole Vu+ Solo 1.6.2 Final Backup @isayuksel.usb
ضع تعليق باستخدام حساب الفيس بوك