As of now there is only the "Backup Suite", in this IPK are 2 plugins included, namely The first NFI plugin is a version in a backup:
NFI format, which can be put back VuUtil.exe, is placed in the root of the HD of the VU-image-file backup vuplus-<date> _ <time>. NFI so bv backup image-vuplus-20101018_173645.nfi
USB format that is placed in the folder on the HD vuplus and, if there is a valid USB device is inserted, it also copies to USB. It could set back as usual by the USB into the front USB port and place VU while and to turn the switch on the back of the VU Duo.
This plugin works only if there is a disk in VU Duo is present here is primarily on the backups.
The second plugin is a USB-only plugin, it creates a backup:
USB format directly on the USB stick is produced in the proper format. Again, it could set back by the USB into the front USB port and place VU while and to turn the switch on the back of the VU Duo.
This plugin works independently from any HD is present or not in the VU Duo.
Requirements: to back up automatically to be able to write to USB stick, it is necessary that a file on the USB drive is available with the name vubackupstick (note small letters and no extension, although it should work now If the file has the extension txt).
Tip: During the last days of testing by various people have shown that not all USB sticks well and immediately recognized my experience is that the best results are achieved by first drive into the front USB port to install and then patiently here one second or ten to wait until a message comes, that usually will not display files or that there may install extensions found. Usually you also have the flashing light on the stick (if any). If the stick is not recognized then just pull the stick out and try again. If the stick is then read to Menu -> Applications -> Custom backup program.
I have version 1.3 of backup NFI plugin today what are tests. Besides, I found that the operating system VuPlus not recognize any USB stick. Even a stick which is successfully used for flashing a new image is not always recognized for other tasks. This is indicated by using the File Browser plugin. Only if the drive appears there also, he can also be used by the NFI backup plugin.
To install the first time as if any previous versions of this backup plugin uninstall via Menu> Applications-> red button to delete.
The IPK is included as usual in various ways but the easiest to install, how can it be otherwise, via USB stick.
Put the IPK to a USB stick and places it in the VU Duo, after a few seconds comes a question whether you want to install the extension, press OK and then the green button to install.
After installing just the USB portable memory and restart with the VU Duo Restart Enigma.
Note: I have the version numbers for both plugins and the total package to version 1.5 brought.
I have dozens more backups run during the test and no errors are detected, all 4 sticks plus an 8GB SDHC card into a USB card reader were well known and described, that does not mean that no errors can carry, so a critical look at the created backup never hurts!
Take it to your advantage.
P.S. thanks to Bag58 as streamlining and ideas.
gracias a PLI
ضع تعليق باستخدام حساب الفيس بوك
|مواضيع ذات صلة مع Backup tool for Vuplus NFI images including USB Support|
|linuxsat-support BH 1.72 UK Ready Backup By Ten Below|
|Backup tool SSL82F for DM800|
|PPanel Full 5.4 For OE 1.6 Enigma2 Images By Persian Prince VuPlus & DreamBox|
|PPanel Full 4.3 For OE 1.6 Enigma2 Images (VuPlus + DreamBox) By Persian Prince|
|PPanel Full 3.5 For OE 1.6 Enigma2 Images VuPlus + DreamBox|